护坡模具是矩形,六角形，设计有底部,把模具放上震动的平台,再放入提前搅拌好的混凝土,经过1分钟震动,促使混凝土中气泡散发出,然后将装入混凝土的护坡模具放于阴凉处,等待水泥凝固后拆模具就完成了整个生产工艺。
The curb stone mold is rectangular and designed with a bottom. Put the mold on the vibrating platform, and then put the concrete mixed in advance. After 1 minute of vibration, the bubbles in the concrete will be scattered. Then put the curb stone mold loaded into the concrete in a cool place, wait for the cement to set, and then remove the mold to complete the whole production process.

随着我们对护坡模具的质量和数量的要求都越来越高,所以我们需要对这种模具的各个方面进行不断地改善和发展,因为这种模具的生产过程是比较复杂的,总是容易出现失误,所以总会造成材料的浪费,所以我们应该简化模具的制作过程。

As we have higher and higher requirements for the quality and quantity of curb stone molds, we need to continuously improve and develop all aspects of this kind of molds. Because the production process of this kind of molds is relatively complex and prone to mistakes, it will always cause a waste of materials, so we should simplify the manufacturing process of molds.

还有就是这种模具使用周期是比较长的,我们每次使用完这种模具之后,需要经过大概一两天的时间才能进行下一次的使用,这样对模具的生产效率的影响是非常大的。

In addition, the service cycle of this kind of mold is relatively long. Every time we use this kind of mold, it takes about one or two days to use it again, which has a great impact on the production efficiency of the mold.

还有就是我们应该延长这种模具的使用时间,这样就会减少了对模具的更换,也就相应的节省了资源,是比较符合节能环保的理念的。

In addition, we should extend the service time of this kind of mold, which will reduce the replacement of the mold and save resources accordingly, which is more in line with the concept of energy conservation and environmental protection.